• UPDATED: Connect a round dish to a SWM multiswitch



    They said it couldn't be done. They were wrong. Many folks think that just because you're using a round dish, you can't use SWM technology. That's why people choose to buy expensive multiswitches from Spaun or other companies. The truth is that SWM technology works just as well with a round dish as it does with a Slimline Dish. You can connect an older SWM8 or SWM16 multiswitch easily. This same trick works with a SWM30, the current multiswitch from DIRECTV, but it doesn't work with the newest receivers. I'll explain below.

    Installing a SWM is easy and it's the exact same procedure used with the Slimline Dishes. Connect the two lines from the dish to the 99/101/103 ports. These are the two ports on the left side, if the inputs are on the bottom. From there, connect the power inserter and receivers, and you're all set!

    The advantage to using SWM technology instead of a simpler less expensive switch is the consistent output level from a powered switch. In many cases, powering the multiswitch will provide more consistent power to the dish and also make it easier to wire other receivers by locating the splitter in a more centrally located area.

    Remember when setting up a SWM, that only D12, R16, R22, and H/HR series receivers are compatible. Other receivers can be used through the legacy ports. SWM-connected receivers can be set to dish type 01-18" Round for use with the standard dual LNB dish, and the multiswitch type must be set to SWM.

    It's important to know that this trick won't work with Genie DVRs or clients, whether they are the old HR34/44/54 type or the new Genie 2. These devices are designed only to work with Slimline dishes and it's not possible to set the dish type to 18" round anymore.

    Here's a diagram that shows the installation:



    Click above to view or download the file directly.
    This article was originally published in forum thread: TIP: Connect a round dish to a SWM multiswitch started by SS@SolidSignal View original post

    Like what you've read? Register and leave a comment...
    Already registered here? Type away!